- Written by Srinivasan Koona Lokabiraman
- Posted on 6月 3, 2020
- Updated on 6月 3, 2020
- 6281 Views
It is often useful to know on a per AFI/SAFI basis, the number of paths that have been selected from a peer as best paths.
- Written by Sameer Shah
- Posted on 3月 3, 2023
- Updated on 3月 16, 2023
- 3922 Views
This feature provides a mechanism to mark specific routes as resilient ECMP (RECMP) eligible using BGP RCF policies. A policy based mechanism provides a lot of flexibility in choosing the RECMP eligible routes using criteria such as:
- Written by Andrew Tran
- Posted on 6月 20, 2022
- Updated on 6月 29, 2022
- 5122 Views
Routes covered by a resilient equal-cost multi-path (RECMP) prefix are types of routes that make use of hardware tables dedicated for equal-cost multi-path (ECMP) routing.
- Written by Johnny Chen
- Posted on 6月 24, 2021
- Updated on 5月 9, 2024
- 9104 Views
ECMP Hash visibility CLI determines the output interface for an ECMP set based on the flow parameters supplied by the user. Ingress interface, source IP address, destination IP address and IP protocol are the required parameters.
- Written by Lavanya Conjeevaram
- Posted on 6月 29, 2016
- Updated on 4月 22, 2024
- 7926 Views
ECMP Hash visibility CLI determines the output interface for an ECMP set based on the flow parameters supplied by the user. Ingress interface, source IP address, destination IP address and IP protocol are the required parameters. L4 source and destination ports and VLAN identifier are optional, but should be specified if the packet has them.
- Written by Konrad Ciekot
- Posted on 10月 24, 2019
- Updated on 10月 24, 2019
- 7599 Views
As of 4.22.1F Load Balance Profiles can be used to explicitly configure ECMP Load Balance parameters. In addition,
- Written by Feng Zhu
- Posted on 5月 7, 2024
- Updated on 5月 7, 2024
- 245 Views
A forwarding equivalence class (FEC) entry is the data structure that holds all reachable vias where the packets should be sent to, for certain routes. Before this feature, a FEC could not contain both IPv4 next hop vias and IPv6 next hop vias. This feature starts supporting FECs that have both IPv4 next hop vias and IPv6 next hop vias. In an Equal Cost Multi-Path (ECMP) FEC, some of the vias may have IPv4 next hop and others may have IPv6 next hop.
- Written by Binglai Niu
- Posted on 4月 24, 2020
- Updated on 2月 15, 2024
- 5959 Views
On network devices, when a route is programmed, a certain portion of hardware resources is allocated and associated
- Written by Pedro Coutinho
- Posted on 6月 4, 2020
- Updated on 6月 4, 2020
- 5393 Views
EOS version 4.24.1F introduces support for specifying multiple vias to form ECMP in MPLS static tunnels. A new
- Written by Ryan Halbrook
- Posted on 6月 28, 2021
- Updated on 6月 28, 2021
- 6555 Views
Multipath color is a new multicast multipath mode for controlling PIM RPF selection. In the default multipath
- Written by Emil Maric
- Posted on 2月 16, 2021
- Updated on 2月 16, 2021
- 5908 Views
Routes covered by a resilient equal cost multi path (RECMP) prefix are types of routes that make use of hardware tables
- Written by Diksha Mahajan
- Posted on 8月 31, 2023
- Updated on 9月 1, 2023
- 2833 Views
This feature adds support for source interface based load-balancing with Dynamic Load-Balancing ( DLB ) and Hash based Load-Balancing on Equal Cost Multi Path ( ECMP ) groups
- Written by Nikhil Goyal
- Posted on 8月 20, 2020
- Updated on 8月 20, 2020
- 4439 Views
This feature adds the support for learning multiple equal cost routes for a destination in the RIP protocol. This
- Written by Binglai Niu
- Posted on 10月 21, 2021
- Updated on 10月 21, 2021
- 5499 Views
Nexthop groups is a routing mechanism where users can configure a set of nexthops by specifying their nexthop
- Written by Sandeep Betha
- Posted on 4月 21, 2020
- Updated on 4月 27, 2020
- 5957 Views
In the ribd routing protocol model, the “maximum paths … ecmp …” command allows restricting the number of BGP